Application:This equipment is mainly used for high-speed stranding of core wire and tape of various cables.
Performance characteristics and parameters:
·Core diameter range:②1.0~6.0mm;
·Maximum outside diameter of stranding:②25 mm;
·Stranding pitch:40~700mm(stepless adjustable);
·Stranding Direction:S,Z;
·Maximum rotation speed:400 R/min (stable production);
·Maximum speed of non-metal windings:1500r/min (stable production):
·Non-metal windings specification:0400×076×(10~40)mm;
·Non-metal windings covering ratio:15~50%(central windings);
·Setting-out Form:Passive or passive unwinding;
·Reel Specification:②630mm;
·Reel specification:②1250mm,inner hole 125(non-gb custom reel);
·Rope specification and quantity:0400x030x400mm (8);
·Device orientation:Right mobile phone (facing device operation,left reel,right reel);
·Cantilever:made of high-strength Aluminum Alloy;
·Wire Arrangement:servo motor+ball screw;
·Upper and lower spools:electric lifting,mechanical clamping,with locking protection;The upper and lower
spools must be fast and efficient (the trolley has fast-forward function,and the up and down lifting can be accelerated properly).
·Crossing ways:All crossing ways are well designed,and there is no slip out,scratch,broken skin or broken wires during high speed operation;
·Complete safety protection devices and functions are in place.The lifting operation of the SPOOL can only be carried out when the cantilever is at horizontal level.
·There are clamping devices at the inlet end of the main engine,and the cables can be compressed after the main engine is stopped to prevent the cables from falling back;
·The main parts are equipped with automatic lubrication and the main bearings are equipped with temperature measuring devices;
·The main engine motor is 45KW;
·The frequency converter is 45KW;
·The cantilever main brake is 1 set;
·The take-up Motor is 45KW;
·Frequency Converter:45KW;
·Wire Brake;Group 1;
·Wire Arrangement:Servo Motor 1KW drives ball screw wire arrangement,front and rear limit switch,and can realize fast-forward and fast-backward function of wire disc;
·Wire Pitch Setting:Limited left width of wire disc set by Plc.,at the same time set the cable diameter,automatic tracking
·Cable locking:Manual locking.the whole machine using sound-proof cotton plus zinc-plated perforated partition;
·Cable lifting:Electric Motor (3KW)lifting,reducer;
·Safety Control:Upper and lower limit safety limit detection switch control;
·Precision ball screw using R40;
·Precision guide using HGW45B.
Mechanical specification
| Machine model | LD-0500 |
| Application | Suitable for high frequency data cable,LAN cable(cat5)and cat 6 wisting |
| Rotation speed | 2500RPM(5000t/min) |
| Wire feeding diameter | 20.75-②1.5mm |
| Twisting pitch | 4.42-41.62mm |
| Twisting direction | Either left or right |
| Take-up bobbin | 2500mm |
| Take-up tension | Magnetic powder clutch control tension |
| Traverse | Bearing type polish rod traverse,traverse pitch and traverse widtn can be adjusted freely |
| Power | Servo motor+controller |
| Brake | Electromagnetic brake,the machine will stop automatically in case of inside and outside wire is broken |
| Dimension | L2600XW1300XH1400mm |
| Weight | 2300kg |